Drilling mud is one of the materials used in deep well drilling industry. In geotechnical engineering, a mixture of water and clay is called a drilling mud.
In general, this mud is used to remove chips from the bottom of the well. However, other uses, such as cooling and drilling lubrication, have been defined for this material. In this article from Nikan West Gilsonite we want to talk about the role of materials in drilling mud and the minerals used in drilling mud.
The role of materials in drilling mud
Each material has a specific role in the drilling mud; and it brings special features. In addition, the drilling mud used in any situation has been optimized by adding different materials for specific purposes.
Wide range of these materials have been used to change the density of drilling mud. Materials such as sodium bentonite, Attapulgite, asbestos, muscovite and graphite are among these types of additives. These materials prevent problems regarding drill bits clinging during implementation by varying the density of drilling mud. As a result, the work speed would be higher and the drilling would be more convenient. Also changing the density of drilling mud is also effective in faster recovery of drilled material.
Another important role of changing raw material in drilling mud is related to its weight. The three most commonly used substances for weight gain are barite, gallon and lime. Barite and gallon increase the density of the mud; while lime decreases its density.
Minerals used in drilling
The Minerals used in drilling are :
Mica: This material has been used for drilling rocks with high adhesion properties. The mica makes the drill bit not cling to these rocks and makes the operation smoother. Marl rock is one of the rocks with high adhesion.
Graphite: This material is also used when the drill bit has been clung. In this case, the graphics solves the problem; however, once the problem is resolved it must be removed from the well.
Barite and Gallon: These two materials are used to control the density of drilling mud. Adequate explanations had been given about the benefits of density control above.
Lime and dolomite: These two materials are used for density loss. Their alkali properties can also be used in certain conditions.